Your Partner for Incredibly Precise Positioning Solutions!

Piezo Control Electronics and Amplifiers

The resolution of piezoelectric actuators is almost unlimited. The most important aspect of high resolution and high precision positioning is the noise level of the piezo control electronics.

Piezosystem Jena, guarantee a noise level <0.3 mV RMS at 500 Hz, from our amplifier systems. Our system’s high speed scanning and positioning guarantees very high accuracy, with low noise operation. In addition, Piezosystem Jena offers a number of different amplifier modules and special modules for any application

For Full Product Information Click Here

Piezo Control Electronics and Amplifier - Product Overview

Modular Amplifier System d-Drive
Digital controller
Number of channels: 1 to 6
Output current: 50 mA ... 300 mA
Output voltage: -20 ... 130 V
Interface: USB

Digital Controller d-Drivepro
Resolution: 24 bit (oversampling)
Output current: 3 x 120 mA (continuous)
Output voltage: -20 ... 130 V
Interface: RS232, USB, Ethernet, optional: CAN, RS485, RS422

Modular Controller System ENV
Analog Controller
Number of channels: 1 up to 10
Output current: 40 mA ... 800 mA
Output signal: -20 ... 130 V
Optional Interface: RS232, IEEE

Series NV 40/3
Number of channels: 3 analog
Output current: 40 mA/channel
Output signal: -20 ... 130 V
Interface: USB, RS232

Series NV 120/1
Number of channels: 1 analog
Output current: 120 mA
Output signal: -20 ... 130 V
Interface: USB, RS232

Series NV 40/1
Number of channels: 1 analog
Output current: 40 mA
Output signal: -10 ... 150 V
Interface: RS232

Series 30V300 OEM Piezo Amplifier
Number of channels: 1 analog
Output current: 300 mA Output signal: -20 ... 130 V
Interface: none

Series 30DV50 OEM Piezo Amplifier
Number of channels: 1 digital
Output current: 50 mA
Output signal: -20 ... 130 V
Interface: RS232

Series 30DV300 OEM Piezo Amplifier
Number of channels: 1 digital
Output current: 300 mA
Output signal: -20 ... 130 V
Interface: RS232

Series 12V40 OEM Piezo Amplifier
Number of channels: 1 analog
Output current: 40 mA
Output signal: -10 ... 150 V
Interface: none

Series nano box OEM Amplifier
Number of channels: 1 analog
Output current: 8 mA
Output signal: 0 ... 150 V
Interface: none

Series nano box USB Amplifier
Number of channels: 1 digital
Output current: 10 mA
Output signal: 0 ... 130 V
Interface: USB

For Full Product Information Click Here


The following are our full line of Piezo control electronics and amplifiers

static and low dynamic application (<30 Hz) without positioning feedback sensor

12V40 1 40 mA analog, OEM

static and low dynamic application (<30 Hz) with positioning feed back sensor

12V40 SG 1 40 mA analog, OEM, sensor-controller
NV 40/1 CLE 1 40 mA analog, RS232, display, sensor-controller
NV 40/3 CLE 3 40 mA analog, RS232, USB, display, sensor-controller
ENV 40 1 40 mA analog, 19"-ENV-module, sensor-controller, display
ENV 40 CSG 1 40 mA analog, 19"-ENV-module, sensor-controller

dynamic application (typ. 100 Hz), with and without positioning feedback sensor

ENV 300 1 300 mA analog, 19"-ENV-module, display
ENV 300 CLE 1 300 mA analog, 19"-ENV-module, display, sensor-controller

high dynamic application (typ.>100 Hz)

30V300 1 300 mA analog, OEM
ENV 800 1 800 mA analog, 19"-ENV-module, display

d-Drive - digital amplifier system with automatic closed loop calibration (ASI-function)

EVD 50 1 50 mA digital, 19"-module, sensor-controller, exchangeable actuator
30DV50 1 50 mA digital, OEM

Please contact our company direct or one of our representatives in your area, so we can provide you with an individualized recommendation for a piezo control electronics and amplifier system.

Technical information